AL-5-4″-24 – Belt Grinder Wheel Set / Knife Grinder 5″/128mm Drive – 24mm Shaft, 4″/102mm Tracking, 2″/51mm Idle

$122.19 VAT included (where applicable)

Sold out

Get notified when this product is back in stock

THE SHARPENING KIT 43

Ships from

STOCK

Sold out

Wheel Set Description

Set includes:

  • One x 128 mm (5.1 “) diameter drive wheel: 

D drive wheel is CNC machined with 24 mm bore (H7 tolerance). Bore is equipped with an 8 mm key way and a set screw. Wheel is 55 mm wide (2.2 “). Bore is 40 mm long (1.6”). Surface of wheel is truly crowned to insure belt won’t jump off wheel. Please refer to the wheel’s sketch for the exact wheel dimensions

  • Two  x 51 mm diameter idler wheels: 

Each wheel is CNC machined and fitted with  three  12 mm bearings. (Heavy duty 6201 RS bearings) Bearings are rubber sealed to protect from dust. Bearings are placed back to back (best combination). 10 mm wide standoff (sleeve) will raise the wheel of the mounting plate. This bearing combination is the best tested solution against bearing failure as it allow for tightening the mounting bolts without causing any axial force on the bearings  (ball bearings should not bear lateral load)

  • One  x 102 mm diameter tracking wheel:

Each wheel is  CNC machined and  fitted with  three  12 mm bearings. (Heavy duty 6201 RS bearings) Bearings are rubber sealed to protect from dust. Bearings are placed back to back (best combination). 10 mm wide standoff (sleeve) will raise the wheel of the mounting plate. This bearing combination is the best tested solution against bearing failure as it allow for tightening the mounting bolts without causing any axial force on the bearings  (ball bearings should not bear lateral load)

Shipping

We understand that customers would like to receive their purchase as soon as possible. Therefore I provide postage service that is comparable -in speed- to local postal service. And to achieve that:

  • All orders are shipped using FedEx Economy/Priority or GLS Ground
  • All order are shipped the same working day if paid by 3 PM central European time
  • From experience, in most cases; Items arrive in 2-6 work days to all EU countries
  • From experience, in most cases; Items arrive in 3-10 work days to North America
  • From experience, in most cases; Items arrive in 5-15 work days to Australia and New Zealand

Send us a message if you have any questions about the product.

 

Reviews

There are no reviews yet.

Be the first to review “AL-5-4″-24 – Belt Grinder Wheel Set / Knife Grinder 5″/128mm Drive – 24mm Shaft, 4″/102mm Tracking, 2″/51mm Idle”

Your email address will not be published. Required fields are marked *

Carving Courses

Whether you want to learn chip carving or how to carve a spoon and how to keep your tools sharp, we got you covered. Get in touch to book your course.

Track your order

Enter below the tracking number of your order to track it.