SHIPPING NOTE: Ships to Swedish shipping addresses only!

Why the Tormek T-4 Bushcraft?
Equipped with the KJ-45 Centering Knife Jig and SVA-170 Axe Jig to keep your tools ready for the wilderness
Compact water-cooled sharpening system in a stylish green color for all your edge tools
Water-cooled sharpening with no risk of overheating the steel
Exact replication – sharpen your tools with unbeatable precision
Efficient grindstone with adjustable properties equivalent to 220 to 1000 grit
Sturdy, cast zinc top with patented mounts for precise sharpening and full control
Maintenance-free industrial motor (AC) ensures minimal speed loss even under heavy load
Unique drive system with RKX18 rubber drive wheels
Stainless steel shaft with composite EzyLock for easy replacement of grinding wheels
8-year warranty, 5 years + 3 years when you register online (for private use)

Grinding wheel for both fine and coarse sharpening
The Tormek T-4 Bushcraft allows you to sharpen a variety of outdoor knives, hunting knives, fishing knives and axes. This sharpening machine comes with Tormek’s SG-200 Original Grindstone, which provides a wide range of sharpening properties in a single grindstone. You can easily alternate between coarse sharpening at 220 grit and finer sharpening that gives a surface equivalent to 1000 grit. This allows you to restore very badly damaged tools and make them as good as new, but you can easily sharpen tools that are just blunted, too.

Finishing off your sharpening with the leather honing wheel polishes the bevel and removes the burr formed during sharpening. This gives your tool maximum sharpness and a polished edge that lasts.

Swedish-made quality machine
The Tormek T-4 Bushcraft has a fully cast zinc upper body that integrates the vital parts of the machine such as the motor, main shaft, handle and the precision mounts for the universal support. The base of the housing is made of impact-resistant green ABS plastic. All in all, this gives you a sturdy machine that can withstand pressure and offers unbeatable precision. The robust handle means you can easily move the machine when needed.

Sharpens all your tools
Tormek offers a set of jigs for different tools that can be purchased separately and used on the same system, depending on your needs. Chisels, drill bits, scissors and woodturning tools are all examples of other tools you can sharpen with the Tormek T-4 Bushcraft.

Packaging dimensions
Width: 325 mm (12¾”)
Depth: 235 mm (9¼”)
Height: 257 mm (10 1/8″)

Machine dimensions
Width: 240 mm (9 7/16″)
Depth: 205 mm (8 1/16″)
Height: 260 mm (10¼”)

Weight
Inc. packaging: 10,3 kg (22.6 lbs)
Machine only: 8 kg (17.6 lbs)

Color
Green/grey

Cord length
1.7 m (5′ 7″)

Housing
Precision-cast zinc top, powder-coated
Impact-resistant green ABS plastic

Grinding wheel
SG-200 Original Grindstone
Aluminum oxide
Ø 200 × 40 mm (7.87 × 1.57″)

Honing wheel
LA-145 Leather Honing Wheel
Cowhide from Tärnsjö Garveri, ABS plastic.
Ø 145 × 26 mm (5.71 × 1.02″)

Drive system
Unique drive system with RKX18 rubber
Self-adjusting for load

Main shaft
MSK-200 Stainless Steel Shaft with EzyLock

Performance
120 rpm
Torque 8.4 Nm

Motor
Industrial motor, single phase, AC
120 W (input), 100-115 V / 220-240 V, 50-60 Hz
Operation 30 min/h
Maintenance-free
Quiet running, 54 dB
10 000 hours of operating time

Warranty
8-year warranty*, 5 years + 3 years when you register at tormek.com
* The warranty for the Tormek T-4 Original is 2 years when used for commercial, industrial, or educational purposes

Documents
Parts breakdown T-4 ENPdf, 226.1 kB.
Material safety data sheet PA-70 ENPdf, 84.4 kB.
Material Sa

Including in the Box
The Tormek T-4 Bushcraft comes with everything you need to sharpen your knives and axes for hunting, fishing and outdoor activities

KJ-45 Centering Knife Jig for sharpening all your hunting, fishing and outdoor knives
SVA-170 Axe Jig so that you’ll always have a sharp axe with you
SG-200 Original Grindstone with adjustable sharpening properties
LA-145 Leather Honing Wheel for deburring and polishing the bevel
US-103 Universal Support for precision sharpening
The SP-650 Stone Grader, to adjust the grit of your grindstone
WM-200 AngleMaster to measure the existing bevel angle and set the sharpening angle
PA-70 Honing Compound used on the leather honing wheel
EM-15 Edge Marker for coloring the bevel when setting the sharpening angle
HB-10 Tormek Handbook comes in different language versions depending on the market
Complement your Tormek T-4 Bushcraft with a selection of jigs for the other tools you’ll be sharpening (sold separately).